G5 Voodoo Mounting Guide

Hardware

Several mounting options have been designed into the G5 Voodoo cases:

3 lengths of M5 button head cap screws have been included in in the box to cover most mounting scenarios.

Drawings for mount hole locations available in the Downloads Section

The following requirements should be taken into account during installation:

The ECU should be fitted inside the vehicle cabin if practical, in a location that avoids exposure to excessive temperatures and the risk of water ingress.
The location of the ECU should also be physically separated from the ignition components or any other components that may cause interference.
Allow enough room at the end of the ECU for the main wiring harness and tuning cables to be connected.
ECUs used for speedway applications should be mounted securely within the cockpit area, protected from the elements and isolated from vibration.
Please refer to the Wiring Information section in PCLink Help for additional information.