CAN Gauge Available Channels | Link Knowledge Base

Below is a list of available channels the Link CAN Gauge can use.

Available to All ECU’s	Available in G4X and G5
Generic Dash Stream	Link CAN Gauge Extra Mode
Barometric Pressure	Ethanol Content
ECU Volts	Fuel Temperature
Coolant Temperature	Boost Target
Engine Speed	Knock Level Global
Fault Codes	Knock Count Global
Fuel Pressure	Lambda Target
Gear Position	Lambda Correction 1
Ignition Timing	Lambda Correction 2
Injector Duty Cycle	Traction Slip
Inlet Air Temperature	GP Temp 1
Knock Level 1	GP Temp 2
Lambda 1	GP Temp 3
Lambda 2	GP Press 1
MAP	GP Press 2
Mass Air Flow	GP Input 1 Status
Oil Pressure	GP Input 2 Status
Oil Temperature	Driven Wheel Speed
Throttle Position	Driving Wheel Speed
Wheel Speed, LF	CAN TC 1
Wheel Speed, LR	CAN TC 2
Wheel Speed, RF	CAN TC 3
Wheel Speed, RR	CAN TC 4
	CAN TC 5
	CAN TC 6
	CAN TC 7
	CAN TC 8
	Knock Level Detected
	Instantaneous Fuel/Distance
	Math Block 1
	Math Block 2

Available in G4+ as User Streams
CAN_Gauge_Extra_G4+_ID50.lcs	CAN_Gauge_Extra_G4+_ID51.lcs	CAN_Gauge_Extra_G4+_ID52.lcs	CAN_Gauge_Extra_G4+_ID54.lcs
Ethanol Content	Lambda Target	AN Temp 3	CAN TC 1
Fuel Temperature	Lambda Correction 1	AN Temp 4	CAN TC 2
Boost Target	Lambda Correction 2	Differential Fuel Press	CAN TC 3
Knock Level Global	Traction Slip		CAN TC 4
Knock Count Global