Skip to main content
Skip table of contents

Link TCCXX

The TCCxx modules allow you to connect up to eight type-K thermocouples via CAN bus. Thermocouples of this type are suitable for various applications such as measuring exhaust gas temperature (EGT), temperatures before/after the intercooler, turbo housing, cylinder head temperatures, water temperature, oil temperature and more. All measurements are cold junction compensated with a range from 0 to 1250°C (32 to 2282°F) in 0.25°C resolution (14bit). The module is equipped with a four-pin DTM connector for CAN/power and miniature K-sockets for EGT probes. The module supports the CAN 2.0A/B standard with flexible configuration, making it compatible with many devices. The module is pre-configured to work with Link ECUs out of the box. You can configure and update your module as well as query the current temperature and thermocouple status via the activatable Wi-Fi.

 

Features:

  • Cold junction compensated type-K inputs.

  • CAN Bus connection (flexible Can Identifier or predefined protocols)

  • Measuring range from 0 to 1250°C (32 to 2282°F) with 0.25°C resolution

  • Detection of short circuit to ground or if no type-K is connected

  • Standard mini k thermocouple connector

  • Full configuration over Wi-Fi

  • Adjustable transmit frequency (5/10/20/50/100/200/250/500 Hz)

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.